Younisi driving washing machine settled in a steel cord factory company
What is steel cord?
The International Bureau of Standardization of Synthetic Fibers defines steel cord in the standard as: "A structure formed by two or more steel wires, or a combination of strands and strands or a combination of strands and wires."
Steel cords developed with the development of radial tires, which are companions of the automobile industry and highways.
Traditional bias tires use fibers (such as polyester cords, nylon cords) as the skeleton material, while new radial tires use steel cords as the skeleton material. According to their structure, they can be divided into all-steel radial tires and semi-steel radial tires. For steel radial tires, the belt layer and carcass of the former are all made of steel cords as the skeleton material, while the belt layer of the latter is made of steel cords and the carcass is made of fibers as the skeleton material. Cars and light trucks generally use semi-steel radial tires, while heavy-duty trucks and engineering machinery vehicles use all-steel radial tires.
Therefore, according to the definition of steel cord, we know that when the steel cord is produced in the factory workshop, some discarded steel wires will fall on the ground, which will cause certain troubles for floor cleaning. After on-site inspection,Younisi professionals provided specific cleaning solutions. details as follows:
1. Cleaning of narrow passages between lathes
For narrow passages, the model provided is the U700 small ride on Floor Scrubber. Due to its small and flexible body, it can enter and exit the passage at will. In addition, the left and right brush plates are protruding and can be as close to the bottom of the lathe as possible, so that the cleaning area is as comprehensive as possible. This squeegee It can swing left and right to automatically adjust the balance when it hits the lathe base. In addition, the machine uses a large-capacity battery that can last for a long time, reduce charging frequency, and improve work efficiency. In addition, a magnetic strip is equipped on the front of the machine to absorb the ground steel wire to prevent the steel wire from entering the bottom of the floor washer, causing the floor washer to not work properly.
2. Cleaning of large aisles in the workshop
For places with large workshop passages, the U900A ride-on floor washer is highly recommended. It has a large water tank, which eliminates the trouble of changing water back and forth. In addition, the brush plate and squeegee automatically rise and fall, which saves effort in operation. The floor washing width is 900mm, and the work efficiency is high. , greatly reducing customer usage costs. In addition, a magnetic strip is equipped on the front of the machine to absorb the ground steel wire to prevent the steel wire from entering the bottom of the floor washer, causing the floor washer to not work properly.
After comparison, the customer chose the ride-on floor scrubber Younisi U900A. When the machine was delivered, not only the floor was clean, but also the steel wire adsorption effect was good. I was very satisfied with the products and services of Younisi. And subsequently purchased several ride-on floor scrubbers.
Customer satisfaction is a huge driving force for Younisi to move forward, and we hope to serve more and more customers!
